Rabbit L5-2.5L (CBUA) (2008)
Rear Knuckle Alignment Link: Removal and Replacement
Tie Rod
Tie Rod (Rabbit)
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1331
^
Torque Wrench V.A.G 1332
Removing
-
Remove wheel.
-
Remove coil spring.
-
Remove nut -1- and remove coupling rod -2- from the stabilizer bar.
-
Remove bolt -arrow- for tie rod -3-.
-
Remove stabilizer bar clip bolts -arrows-.
-
Remove nut -arrow- and remove bolt toward rear.
-
Remove tie rod.
Installing
-
Install tie rod in vehicle and hand-tighten bolts.
Only bolt on tie rod if dimension "a" is reached!