Rabbit L5-2.5L (CBUA) (2008)
-
Make sure that coil spring is seated correctly in 2 Spring Holders (80-165 mm) VAG1752/4 -arrow-.
-
Remove hex nut from piston rod.
-
Remove components of suspension strut and coil spring using spring compressor V.A.G 1752/1.
Coil spring, installing
-
Place coil spring with spring compressor V.A.G 1752/1 on lower spring plate.
End of spring coil must rest against stop -arrow-.
-
Tighten new hex nut to piston rod.
-
Relieve tension on spring compressor V.A.G 1752/1 and remove from coil spring.
-
Suspension strut, installing.
Tightening Specifications