Rabbit L5-2.5L (CBUA) (2008)
Note:
^
Always replace dust caps.
^
Damaged dust caps allow moisture to enter. Therefore, always use the tool shown.
Rest of installation is in reverse order of removal.
-
Install wheel and tighten.
Tightening Specifications
Wheel Bearing Unit
Wheel Bearing Unit
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1332
Removing
-
Loosen drive axle bolt to wheel hub.
Note: When doing this, vehicle must not stand on wheels, otherwise wheel bearing may be damaged.
-
Remove wheel.
-
Remove brake caliper and engage on body with wire.
-
Remove ABS wheel speed sensor.
-
Remove disc brake.
-
Press drive axle out of wheel hub (in direction of transmission) as far as possible.
-
Remove bolts -arrows-.
-
Remove wheel bearing unit from wheel bearing housing.
Installing
Installation is in reverse order of removal.
-
Install brake caliper.
-
Tighten drive axle bolt to wheel hub:
Note: When doing this, vehicle must not stand on wheels, otherwise wheel bearing may be damaged.
-
Install ABS wheel speed sensor.
-
Install wheel and tighten.
Tightening Specifications