Rabbit L5-2.5L (CBUA) (2008)
Fluid - A/T: Service and Repair
ATF, Filling
ATF, Filling - 09G, 6 Speed A/T FWD
-
Install oil filling adapter VAS 6262/2 hand tight with engine running.
-
Fill 1 liter ATF.
-
Tighten oil filler adapter VAS 6262 to quick release coupling and check:
If ATF flows out of adapter hole:
ATF does not need to be topped off.
-
Allow ATF to drain until it drips.
-
Tighten sealing plug with new seal to 15 Nm. The ATF check is now completed.
If ATF does not drip:
-
Add another liter.
CAUTION! If the ATF level is too high or too low it will adversely affect the operation of the transmission. If 2 liters are missing, you should
check the transmission more closely. There is probably a larger leak.