Rabbit L5-2.5L (CBUA) (2008)
1 - Shift cover with knob
^
Do not remove knob if not necessary. For emergency release, only cover must be removed.
^
Before removing knob, pull button past pressure point and secure using cable tie or suitable wire. This prevents the button from being pressed into
the handle unintentionally.
^
If button is pushed in when knob is removed:
^
Before attaching knob, always pull out button past tangible pressure point
2 - Shift mechanism with selector lever
3 - Bolt with spring
^
3 Nm
4 - Pin
^
Removing Selector Lever Cable
^
Do not grease
5 - Securing plate
^
Always replace after removal
6 - Nut
^
9 Nm
^
Quantity: 4
7 - Shift housing
^
With seal
8 - Selector lever cable
^
Do not grease cable.
9 - Hex bolt with washer
^
8 Nm
^
Quantity: 4