Rabbit L5-2.5L (CBUA) (2008)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor
Transmission Output Speed Sensor - 09G, 6 Speed A/T FWD
Removing
-
Remove valve body.
-
Remove bolt -2- from Transmission Output Speed (RPM) Sensor G195.
-
Remove sensor from transmission.
Installing
Installation is in reverse order of removal. Pay attention to the following:
-
Press sensor into transmission until stop.
-
Tighten bolt -2- of Transmission Output Speed (RPM) Sensor G195.
-
Install valve body.