Rabbit L5-2.5L (CBUA) (2008)
Clutch Master Cylinder: Service and Repair
Master Cylinder, Removing and Installing
Master cylinder, removing and installing - 0A4, 5 Speed M/T
Special tools, testers and auxiliary items required
^
Pliers T10005
Removing
-
Remove mounting bracket.
-
Disengage mount of operating rod for master cylinder using pliers T10005.
-
Place spacer -A- between clutch pedal and stop and press clutch pedal toward spacer.
^
Spacer length = approx. 40 mm (e.g. 1/2 socket wrench insert)
-
Release retaining clip -B- and pull master cylinder out of mounting bracket -arrow 1- and -arrow 2-.