Rabbit L5-2.5L (CBUA) (2008)
Clutch Pedal Assembly: Procedures
Clutch Mechanism General Repair Information
Clutch Mechanism General Repair Information - 0A4, 5 Speed M/T
Note:
^
Before disconnecting the battery, retrieve the coding for radio devices with anti-theft coding.
^
Disconnect battery ground (GND) strap with ignition switched off.
^
If battery is reconnected, please note.
^
Lubricate the various bearing and contact surfaces with grease G 000 450 02.
Clutch Pedal Assembly Overview
Clutch Pedal Assembly Overview - 0A4, 5 Speed M/T
1 - Cross panel
^
With mount for mounting bracket
2 - Gasket
^
Always renew
^
Between mounting bracket and cross panel
^
Self-adhesive
^
Glue on mounting bracket
3 - Mounting bracket
^
For mounting of clutch pedal
^
Some equipment versions have a damper.
4 - Bolt
5 - Over-center spring
6 - Bushing
7 - Pivot pin
8 - Clutch pedal
9 - Base block