Rabbit L5-2.5L (CBUA) (2008)
1 - Dual-mass flywheel
^
Removing and installing.
^
Make sure centering pins fit securely
^
Contact surface for clutch lining must be free of grooves, oil and grease
2 - Clutch plate
^
Only replace together with SAC pressure plate
3 - SAC pressure plate
^
SAC = "Self Adjusting Clutch"
^
Only replace together with clutch plate
^
Check spring connection and rivet connections
^
Only check position of adjustment mechanism with new pressure plates
4 - M6 bolt, 13 Nm, M7 bolt, 20 Nm
^
Loosen and tighten in diagonal sequence and in stages