Rabbit L5-2.5L (CBUA) (2008)
Power Window Switch: Service and Repair
Driver Window Regulator Switch Module
Driver Window Regulator Switch Module
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE: When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim
removal wedge VAS 3409, screwdriver) will be positioned, using commercially available adhesive tape.
In vehicles with 4 doors, the following components are integrated in window regulator switch module on driver side:
-
Left Front Window Regulator Switch E40
-
Drivers Left Rear Window Regulator Switch E53
-
Drivers Right Rear Window Regulator Switch E55
-
Drivers Right Front Window Regulator Switch E81
-
Child Safety Button E318
-
Push Button Lamp L76
NOTE: The components listed above cannot be replaced separately.
In vehicles with 2 doors, the following components are integrated in window regulator switch module on driver side:
-
Left Front Window Regulator Switch E40
-
Drivers Right Front Window Regulator Switch E81
-
Push Button Lamp L76
NOTE: The components listed above cannot be replaced separately.
Removing
-
Turn off the ignition and all electrical consumers.
-
Carefully pry installation frame out of door trim - arrow - using trim removal wedge VAS 3409 or a screwdriver.
-
Disconnect connectors - arrows -.