Rabbit L5-2.5L (CBUA) (2008)
-
Unscrew tank mounting bolts - arrows - and remove tank together with filler tube connecting pipe from vehicle.
Installing
Install in reverse order of removal, noting the following:
-
Tighten all threaded connections to specified torques.
-
Bleed headlamp washer system after completing assembly work.
Windshield and Headlamp Washer System Reservoir, with Auxiliary Heater
NOTE: Depending on equipment, position of individual components may differ slightly from version shown in illustration. Removal is performed in the
same way.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove filler tube for tank for windshield washer system and headlamp cleaning system
-
Remove front bumper cover.
-
Move the lock carrier to the service position.
-
Remove auxiliary heater air intake manifold noise insulation - 11 -.
-
Unclip bracket of air intake noise damper.