Rabbit L5-2.5L (CBUA) (2008)
Wiper Arm: Service and Repair
Wiper Arms, Removing
Wiper Arms, Removing
-
Pry off covers - arrows - using a screwdriver.
-
Remove the mounting nut - arrows -.
-
Slide the arms of the puller T10369/1 - 2 - under the wiper arm - 4 - as shown in the illustration.
CAUTION:
-
The windshield wiper shaft can be damaged.
-
Always use the thrust piece - 3 - to loosen the wiper arm.
-
Turn the pressure bolt - 1 - on the puller clockwise until the thrust piece - 3 - makes contact with the wiper shaft. Using a 6 mm socket head
wrench, rotate the pressure bolt - 1 - on the puller clockwise until the wiper arm - 4 - is released from the shaft.
-
Remove the puller and the wiper arm.