Rabbit L5-2.5L (CBUA) (2008)
Wiper Blade: Service and Repair
Windshield Aero Wiper Blades
Windshield Aero Wiper Blades
Removing
NOTE:
-
Right and left wiper blades may not be interchanged during installation.
-
Aero-wipers are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off front windshield.
-
To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating
windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.
-
Move wiper arms into "service/winter position" by moving windshield wiper lever into "one-touch wiping" position within 10 seconds after
switching off ignition.
-
Fold up wiper arm.
-
Turn wiper blade - 1 - on wiper arm until it reaches stop - arrow A -.
-
Pull off wiper blade - 1 - from wiper arm axle - arrow B -.
Installing
-
Slide wiper blade onto axle of wiper arm.
-
Turn wiper blade on wiper arm axle until it reaches stop.
-
Carefully fold wiper arm back onto windshield.