Rabbit Pickup L4-1588cc 1.6L DSL SOHC (1982)
Water Pump: Service and Repair
The right-hand part of the water pump, which contains the shaft, the seals, the bearing, and the impeller, can be replaced separately. However, you can
avoid removing the camshaft drive belt and sprockets by removing the water pump as a unit before you disassemble it.
For removal of the camshaft drive belt, refer to Engine/Timing Components/Timing Belt. See: Engine/Timing Components/Timing Belt/Service and
Repair
To remove:
-
Disconnect the battery's negative (-) cable. Unplug the wires from the alternator, and remove.
-
On vehicles without air conditioning, remove the alternator mounting bracket-keeping track of the number of spacers installed between the bracket
and the water pump for correct reinstallation.
-
On vehicles with air conditioning, dismount the air conditioning compressor. Then remove the air conditioner bracket, with care.
-
Remove the expansion tank cap from the cooling system. Place a receptacle beneath the water pump for catching the draining coolant.