Routan (7B1) V6-4.0L (CGVA) (2009)
If this programming process is interrupted/aborted, the programming update should be restarted.
Reprogram the Power Sliding Door Modules (both sides) using the StarMobile(R) with the latest software.
After reprogramming, the following must be performed:
Clear any DTC's that may have been set in other modules due to reprogramming.
Warranty
Required Parts and Tools
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.