Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
To install, perform the steps used for removal in reverse order.
-
Install the trailer hitch - 1 -.
-
Tightening specification for bolts - 2 -: 50 Nm + rotate an additional 90°.
-
Install the bumper cover.
-
Install the bracket - 4 -.
-
Screw tightening specification - 5 -: 80 Nm.
DANGER!
Bolts - 3 - are sealing threaded connections and seal the interior from exhaust gases and must be installed in any case.
-
Make sure the bolts - 3 - fit securely.
-
Screw tightening specification - 3 -: 20 Nm.