Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1594002.png)
-
Pull off seal of window guide - 2 - carefully from the trim panel - arrow b -.
-
Remove the screws - 3 - and pull the trim - 1 - under the window shaft strip upward - arrows c -.
-
Pull the trim - 1 - in the direction of the B-pillar - arrows d -.
Installing
‹› Inspect the spring clamps - 5 -, the seal - 3 - and the adhesive tape - 4 - for damage and completeness. Replace parts if necessary.
-
Slide the trim - 1 - in - arrow a - on to the window frame.
