Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1607001.png)
Body Emblem: Service and Repair
Name Plates and Emblems Installation Information
‹› Before removing, heat the name plates or emblems using a ( V.A.G 1416).
‹› Only use adhesive remover (D 002 000 10).
‹› Make sure the adhesive surfaces are free of dust and grease.
‹› Bond the name plates or emblems immediately after cleaning.
‹› Peel off the protective film just before installing.
‹› The temperature must be approximately 70 °F (21 °C).
