Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
‹› Removing:
-
Remove screws - 2 and 3 -.
-
Pull the noise insulation toward the rear out of the lock carrier mounts.
‹› Installing:
-
Push the noise insulation in the - direction of arrow b - into the lock carrier mounts.
-
Tighten screws - 2 and 3 -.
2
Bolt
‹› Quantity: 1
‹› Tightening specification: 2 Nm
3
Bolt
‹› Quantity: 6
‹› Tightening specification: 2 Nm