volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine - Coolant Temperature Sensor/Switch|Testing and Inspection|Page 1933 > < Engine - Coolant Temperature Sensor/Switch|Testing and Inspection|Page 1931
Page 3
background image

If the specified value was Not obtained:

-

Replace the Engine Coolant Temperature (ECT) Sensor ( G62) Refer to the Repair Information.

°Testing if display is approx. - 40.0 C

-

Disconnect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector - 1 -. 

-

Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector terminals 1 to 2.

-

 Check the value indicated on the scan tool display.

Engine - Coolant Temperature Sensor/Switch|Testing and Inspection|Page 1933 > < Engine - Coolant Temperature Sensor/Switch|Testing and Inspection|Page 1931