volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cigarette Lighter Assembly Overview|Page 7961 > < Cigarette Lighter Assembly Overview
Page 1
background image

Cigarette Lighter: Service and Repair
Cigarette Lighter Socket

Cigarette Lighter Socket

The following procedures apply to left rear cigarette lighter (U3),right rear cigarette lighter ( U7),rear cigarette lighter (U9),12V outlet 2 (U18),12V
outlet 3 ( U19),12V outlet 4 (U20),cigarette lighter 2 (U25) and 12V outlet 5 (U26 ) with illumination.

‹› The procedure for removing and installing is the same for all power sockets and is only described for the cigarette lighter socket.

CAUTION!
Using force to remove cigarette lighter sockets without illumination can result in damage to the mounting sleeve retainers.

The puller T40148 can only be used to remove cigarette lighter sockets with illumination.

The puller is not capable of releasing the retainers on power sockets without illumination.

Power sockets without illumination usually cannot be removed without damage.

Special tools, testers and auxiliary items required

‹› Puller (T 40148)

Removing:

-

Remove cigarette lighter insert or blank plug from receptacle.

‹› The illustration shows the socket removed.

CAUTION!
The outlet or mounting sleeve can be damaged.

Make sure the puller is seated properly or the mounting sleeve retainers will not release.

-

Insert puller - arrow - in receptacle so retainers -  1 - engage in recesses - 2 -.

-

Release the mounting sleeve retainers by pulling on grip piece -  3 - in direction of - arrow -.

Cigarette Lighter Assembly Overview|Page 7961 > < Cigarette Lighter Assembly Overview