Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit
Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
Removing
-
Remove the drive axle bolt. Refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and
Repair/Procedures.
-
Remove wheel.
-
Remove brake caliper with brake carrier and hang on body using wire.
-
Remove ABS wheel speed sensor.
-
Remove disc brake.
-
Remove nuts - arrows - on left and right side of vehicle.
-
Pull control arm out of lower ball joint.
-
Pull the drive axle out of the wheel hub.
-
Remove bolts - arrows -.