Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Engine Control Module: Service and Repair
Engine Control Module with Anti-Theft Immobilizer, Removing and Installing
Engine Control Module with Anti-Theft Immobilizer, Removing and Installing
If Engine Control Module (ECM) will be replaced, connect Vehicle Diagnosis, testing & info. system (VAS 5051B) and perform Guided Function
"Replace control module".
Special tools, testers and auxiliary items required
‹› Locking pliers
Removing
-
Switch off ignition.
-
Remove windshield wiper arms => Electrical Equipment
92 Front windshield wiper system; removing and installing wiper arms.
-
Remove plenum chamber cover => Body Exterior 64 Removing and installing plenum chamber cover.
-
Remove bolts - 1 -.
-
Cover plenum chamber with a clean cloth so that it does not get scratched.
-
Raise engine control module with retaining mounting slightly.
-
Release engine control module in the - direction of the arrow - and pull it out slightly.
-
Bend raised ends - 1 - of locking bracket outward.