Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-867003.png)
-
Remove drive plate again and use shim - 2 -. Tighten bolts - 3 - again to 30 Nm.
‹› Tightening specifications => [ (Item 6) Bolt ] See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Crankshaft Seal
Retainer/Service and Repair/Sealing Flange, Transmission Side and Dual Mass Flywheel/Drive Plate, Assembly Overview
