Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-705002.png)
-
Disconnect coolant hoses and catch leaking coolant using a cloth.
-
Remove both bolts - arrows - and pull the fuel filter slightly forward.
-
Unclip lines at rear side of fuel filter.
-
Disconnect harness connector for Flexible Fuel (FF) sensor (G133) and remove fuel filter.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
Replace seal between connection and fuel filter cover.
-
Tighten sealing plug of water drain connection to 3 Nm.
-
Fill the cooling system. Refer to --> [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures.
