Touareg V10-5.0L DSL Turbo (BKW) (2004)
Start / Stop Switch: Service and Repair
Access/Start Authorization
Access/Start Authorization Button
‹› The access/start authorization button (E408) allows the vehicle to be started without actively using the ignition key.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
CAUTION!
When disconnecting battery, procedure must always be followed as described in the reinformation anual --> [ Battery, with Auxiliary
Battery or Two-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will
result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.
-
Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Battery, One-Battery Layout, Disconnecting and Connecting.
-
Remove gear selector cover --> Body Interior 68 Removal and Installation.
-
Remove screws - arrows -.
-
Disconnect electrical connector.
-
Remove Access/Start Authorization Button (E408).
Installing
Install in reverse order of removal, noting the following:
‹› Adaptation or coding of Access/Start Authorization Button (E408) after removing and installing is not necessary.