Touareg V10-5.0L DSL Turbo (BKW) (2004)
Wiring Harness: Service Precautions
Safety Measures
CAUTION:
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Disconnect negative (-) battery terminal.
-
When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on
performing OBD program and electrical system function checks.
WARNING:
-
HIGH VOLTAGE
-
Always disconnect battery Ground (GND) strap prior to servicing any parts of vehicle electrical system marked with the yellow "HIGH
VOLTAGE"symbol.
-
After disconnecting battery, briefly turn affected system on and off in order discharge any residual voltage
CAUTION:
-
Airbag harness and connector repairs must only be performed using VAS 1978 Wiring Harness Repair Kit and VAS 1978 Instruction Manual.
-
Airbag harness and connector repairs must only be performed using genuine Volkswagen replacement terminals, connectors and harnesses.