Touareg V10-5.0L DSL Turbo (BWF) (2006)
ABS Light: Initial Inspection and Diagnostic Overview
Level Control System Indicator Lamps
Warning Lamps
ABS Warning Lamp (K47)
‹› If ABS warning lamp (K47) - 3 - does not go out after the ignition is switched on and the test sequence is complete, it could be caused by the
following errors:
a
Voltage supply is below 10 Volt
b
There is a malfunction in the ABS
The ABS system remains switched off during an ABS malfunction - b -, but the traditional brake system remains fully functional.
c
Since the last time the vehicle was started there was a temporary speed sensor malfunction.
In this case the ABS warning lamp (K47) will go out after the engine is restarted and the vehicle speed exceeds 2.75 km/h.
d
The connection from instrument cluster to ABS control module (w/Electronic Differential Lock (EDL) (J104) is interrupted.
e
ABS warning lamp (K47) is faulty.