Touareg V10-5.0L DSL Turbo (BWF) (2006)
Exhaust Pipe: Locations
Front Exhaust Pipe With Catalytic Converter, Particulate Filter and Attachments, Assembly
Overview
Front Exhaust Pipe With Catalytic Converter, Particulate Filter And Attachments, Assembly Overview
NOTE: Components depicted here correspond to cylinder bank 2. They are different only as a mirror image of components for cylinder bank 1.
1
-
Turbocharger
-
Turbocharger, assembly overview
2
-
Gasket
3
-
25 Nm
4
-
Heated Oxygen Sensor (HO2S), 50 Nm
-
Can only be replaced with engine removed
-
Grease only threads with hot bolt paste G 052 112 A3 (anti-seize compound). Hot bolt paste G 052 112 A3 must not get into slots on
sensor body.
-
To remove, use open end wrench for oxygen sensor 3337
Cylinder bank 1:
-
Oxygen sensor G39
Cylinder bank 2:
-
Heated Oxygen Sensor (HO2S) 2 G108
5
-
Pre-Particle Filter Temperature Sensor, 45 Nm
Cylinder bank 1:
-
Bank 1 Exhaust Gas Temperature (EGT) Sensor 2 G448
Cylinder bank 2:
-
Particle Filter Intake Temperature Sensor 2 G498
6
-
Pressure line
-
Ensure seated tightly
Cylinder bank 1:
-
To Exhaust Pressure Sensor 1 G450, location
Cylinder bank 2: