Touareg V10-5.0L DSL Turbo (BWF) (2006)
Catalytic Converter: Service and Repair
Front Exhaust Pipe with Catalytic Converter, and Particle Filter Assembly Overview
‹› The components illustrated correspond to cylinder bank 1. They are a mirror image of the components for cylinder bank 2.
1
Turbocharger
‹› Turbocharger assembly overview, refer to --> [ Turbocharger Assembly Overview ] See: Fuel Delivery and Air
Induction/Turbocharger/Service and Repair/Turbocharger Assembly Overview.
2
Gasket
‹› Replace.
3
25 Nm
4
Heated oxygen sensor, 50 Nm
‹› Can only be replaced with the engine removed, refer to --> [ Engine, Removing ] See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Removing.
‹› Grease threads only with hot bolt paste (G 052 112 A3) (anti-seize compound). Hot bolt paste (G 052 112 A3) must not get into slots on
sensor body.
‹› To remove, use open end wrench for oxygen sensor (3337)
Cylinder bank 1:
‹› Oxygen sensor (G39)