Touareg V6-3.2L (BMX) (2005)
-
Install the bolts - 3 - into the bracket.
Door handle engages again into lock cylinder housing with a very audible click.
‹› During installation, lock cylinder housing must be pressed onto the outer door panel. The door handle - 1 - rests lightly against the outer door
panel.
Then, continue in reverse order of removal.
‹› Always perform a function test. The door cannot be opened if it is not adjusted correctly or the release is not clipped in correctly.
Door Lock
Rear Door
Door Lock
The subframe consists of the assembly carrier and the window frame.
Window regulator, door lock and speaker are secured to subframe.
Door lock can only be removed in conjunction with subframe.
Removing
All vehicles
-
Remove rear door trim..
-
Remove the lock cylinder housing. Refer to --> [ Lock Cylinder Housing ] See: Lock Cylinder Housing