Touareg V6-3.2L (BMX) (2005)
Brake Booster Vacuum Sensor: Locations
Electrical and Electronic Component Locations
1
Anti-lock Brake System (ABS) hydraulic unit (N55)
‹› Component location: In right side plenum chamber.
The hydraulic unit consists of the components:
‹› ABS hydraulic pump (V64).
‹› Valve block (contains the in/outlet valves).
‹› The ABS hydraulic pump (V64) and valve block must not be separated from one another.
‹› From 11.06 with brake pressure sensor (G201)
2
ABS control module (w/Electronic Differential Lock (EDL)) (J104)
‹› Component location: At hydraulic unit on right side of plenum chamber.
‹› Do not disconnect connector before successfully completing On Board Diagnostic (OBD). Switch ignition off before separating connector.
3
Brake pressure sensor (G201)
‹› Component location: through calendar week 48/06 on brake master cylinder.
‹› Removing and installing, refer to --> [ Brake Pressure Sensor 1 ] See: Hydraulic System/Brake Fluid Pressure Sensor/Switch/Service and
Repair.