Touareg V8-4.2L (AXQ) (2006)
-
Press wheel speed sensor wiring - 4 - into retainer on brake caliper.
-
Reconnect connectors - 3 - and - 1 - for brake wear indicator in retainer on brake caliper.
-
Secure brake wear indicator wiring in retainer - 2 - on brake caliper.
-
Install retaining spring into upper bore - arrow - and turn down - direction of arrow -.
-
Set retaining spring on bottom of carrier.
-
First press retaining spring in - direction of arrow A -, then at the same time into bore of brake caliper - direction of arrow B -.
-
Bleed brake system.
-
Install wheels.
Tightening torque specification for wheel bolts.
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level.
Tightening torques
17" (1LC) Caliper
Brake Caliper
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1410)