Touareg V8-4.2L (AXQ) (2006)
/Page-1512010.png)
-
Insert retaining spring in upper hole - arrow - and rotate in the direction of - arrow - -
-
Attach retaining spring to lower brake carrier.
-
Push retaining spring in the direction of - arrow A - first and then into hole of brake caliper at the same time direction of - arrow B
-
Bleed brake system.
-
Install wheels.
Note:
^
Before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
^
Check brake fluid level.
Tightening torques:
Tightening torques
Brake caliper FN 44, servicing
Rear brakes, FN44 brake caliper, servicing
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
To siphon off brake fluid from the brake fluid reservoir, use the brake filler and bleeder unit VAS5234.
^
Before removing a brake caliper or disconnecting a brake hose, the brake pedal loading device V.A.G. 1869/2 should be installed (to relieve
pressure).
