Touareg V8-4.2L (AXQ) (2006)
-
Remove bolts - arrows - and remove rear toothed belt cover.
Continuation for both cylinder heads
-
Disconnect connector from Camshaft Position (CMP) Sensor and remove Camshaft Position (CMP) Sensor housing with cover and cone.
-
Verify TDC position of camshafts. The markings on camshafts must be aligned with both arrows on bearing cap - arrows -.
When re-using camshaft roller chain
-
Mark roller chain - arrows - before removing (e.g. with paint, arrow pointing in direction of rotation).