Touareg V8-4.2L (AXQ) (2006)
Ambient Light Sensor: Service and Repair
Rain Sensor or Rain/Light Recognition Sensor
‹› Removing and installing Rain Sensor (G213) and Rain/Light Recognition Sensor (G397) is identical.
‹› Depending on vehicle equipment (windshield tint), different sensors are installed.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove interior mirror --> Body Interior 68 Removal and Installation.
-
Disconnect harness connector - 1 - from Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) - 2 -.
-
Using e.g. a screwdriver, pry Rain Sensor (G213) or Rain/Light Recognition Sensor (G397) - 1 - out of bracket - 2 -.