Touareg V8-4.2L (AXQ) (2006)
Engine Control Module: Service and Repair
Engine Control Module
Engine Control Module
If Engine Control Module (ECM) will be replaced, connect Vehicle Diagnosis, testing & info. system (VAS 5051B) and perform Guided Function
"Replace control module".
Removing
-
Switch off ignition.
-
Remove windshield wiper motor on the right side: --> Electrical Equipment 92 Removal and Installation
-
Release both connectors from control module and disconnect them.
-
Control module can now be removed.
Installing
-
Set control module into mounting frame.
-
Connect harness connectors and engage them.
-
Install windshield wiper motor on right side: --> Electrical Equipment 92 Removal and Installation
-
Install plenum chamber cover.
-
Adapt new Engine Control Module (ECM): "Guided Functions "