Touareg V8-4.2L (AXQ) (2006)
Wire resistance: max. 1.5 ohms
-
Also check the wire for short circuit to B+ and Ground (GND).
Specified value: infinite ohms
-
Check wire between 2-pin connector terminal 1 and Motronic Engine Control Module (ECM) Power Supply Relay (J271) for open circuit
according to wiring diagram
Wire resistance: max. 1.5 ohms
-
Erase DTC memory of Engine Control Module (ECM) , Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.
If no malfunctions are found in wires:
-
Replace Motronic Engine Control Module (ECM) (J220).