volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Ultrasonic Sensor, Antitheft > < Towing Recognition Control Module|Page 694
Page 1
background image

Tow Sensor: Service and Repair
Vehicle Inclination Sensor

Vehicle Inclination Sensor

‹› To remove the Vehicle Inclination Sensor (G384), anti-theft warning system must be deactivated --> [ Anti-Theft Alarm System, Activating and

Deactivating ] See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General
Diagnostics/Anti-Theft Alarm System, Activating and Deactivating. 

Removing

-

Switch off ignition, switch off all electrical consumers and remove  ignition key.

-

Remove right side panel trim in luggage compartment -->  Body Interior 70 Removal and Installation 

-

Disengage connector - 2 - and disconnect it from Vehicle Inclination Sensor (G384).

-

Remove mounting bolts - 1 - and remove  Vehicle Inclination Sensor (G384) upward out of bracket. 

Installing

Install in reverse order of removal.

Ultrasonic Sensor, Antitheft > < Towing Recognition Control Module|Page 694