Touareg V8-4.2L (AXQ) (2006)
Brake Booster Vacuum Sensor: Service and Repair
Brake Booster Pressure Sensor G294, Removing and Installing
Brake Booster Pressure Sensor G294, removing and installing
Removing
-
Remove plenum chamber cover.
-
Disconnect connector - 1 -.
-
Carefully pry on sensor Brake Booster Pressure Sensor G294 and remove.
Installing
Installation is performed in the reverse order of removal.
Checking check valve:
Valve must allow air to flow in direction of arrow.
Valve must remain closed in opposite direction.
Observe correct installation position.