Touareg V8-4.2L (AXQ) (2006)
/Page-1643006.png)
-
Remove nut at terminal 50 - 1 - and nut at positive (B+) terminal - 2 - and remove cables from solenoid.
CAUTION!
Screw connections on magnetic switch can twist.
The solenoid switch can be damaged.
When removing and installing nuts at positive terminal and terminal 50, counterhold the threaded connection at the solenoid switch
using an open-end wrench.
-
Set the wires aside.
-
Remove the lower bolt for the starter - arrow - on the engine side.