Touareg V8-4.2L (AXQ) (2006)
CAUTION!
Without this wood block inserted, there is the danger of injury when lower control arm moves back to initial position.
-
Install tools onto wheel bearing housing, as shown in illustration.
1. Nut (T10230/2)
2. Press piece (T10230/13)
3. Thrust pad (T10230/6)
4. Tube (T10230/5)
5. Press piece (T10230/4)
6. Tube (T10230/3)
7. Thrust plate (T10230/7)
8. Hydraulic press (VAS 6178) with pressure head (T10205/13)
CAUTION!
Before pressing out, place engine and transmission jack (VAG 1383 A) with universal mount underneath cylinder, cylinder may fall
down at end of pressing out procedure.
-
Press out bonded rubber bushing.
Installing