Touareg V8-4.2L (AXQ) (2006)
/Page-1996001.png)
Rear Subframe: Locations
I - Subframe, Stabilizer Bar, Stone Deflector, Assembly Overview
Note:
^
Welding and straightening work on supporting or wheel carrying components of suspension is not permitted.
^
Always replace self-locking nuts.
^
Always replace corroded bolts/nuts.
^
If components with bonded rubber bushings were replaced or bolts/nuts on these components were loosened, corresponding wheel suspension
must be lifted into curb weight position.
- Arrow A - direction of travel
1 - Final drive
2 - Self-locking nut
^
M12 x 1.5
^
90 Nm plus an additional 1/4 turn (90 Degrees)
^
Always replace after removal
3 - Stone protection plate
4 - Expanding rivet
5 - Subframe
6 - Self-locking nut
^
M12 x 1.5
^
90 Nm plus an additional 1/4 turn (90 Degrees)
^
Always replace after removal
7 - Hex bolt
^
M12 x 1.5 x 90
