Touareg V8-4.2L (AXQ) (2006)
Center lines - A - and - B - must be parallel to each other.
-
End of spring coil must rest against stop of upper washer - arrow 1 -.
-
Make sure protective foil is clipped in upper spring plate - arrow 2 -.
-
Tighten new hex nut to piston rod.
-
Relieve tension on spring tensioner (VAS 6046) and remove from coil spring.
-
Install strut. Refer to --> [ Strut ] See: Removal and Replacement/Front Suspension/Strut.
Tightening Specifications
Rear Suspension