Touareg V8-4.2L (BAR) (2007)
-
Pull out dryer cartridge - 1 - in direction of arrow using needle-nose pliers.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
If necessary, clean upper area of inside surface of fluid reservoir - B - and coat it lightly with refrigerant oil.
-
Replace sealing cap - A - with o-ring seals - C -.
-
Coat the new o-ring seal - C - and new sealing cap - A - lightly with refrigerant oil before installing.
-
Install the new dryer cartridge - D -.
‹› Do not install any dryer cartridge that has been exposed to the air longer than absolutely necessary because it will have absorbed moisture from
the air. This includes cartridges that were not stored in their original packaging or whose packaging is damaged.
‹› A dryer cartridge that is exposed to the air becomes saturated with moisture quickly and becomes unusable.
-
Install the sealing cap - D - and secure it with the circlip - C -.