volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 17965 > < Initial Inspection and Diagnostic Overview
Page 2
background image

ABS warning lamp (K47) and brake  system warning lamp (K118).

‹› If ABS warning lamp (K47) - 3 - goes  out but brake system warning lamp (K118) -  4 - lights up, the malfunctions causes may be:

a

the brake fluid level is too low.

Three warning tones are audible after switching on the ignition.

b

There is a malfunction in the wiring to warning light for brake system (K118). 

‹› If ABS warning lamp (K47) - 3 - and brake system warning lamp (K118) - 4 - lights  up, ABS system is malfunctioning. A change in braking

behavior should be checked.  

CAUTION!
After ABS warning lamp (K47) and brake system warning lamp (K118) light up, rear wheels  may lock prematurely when braking.

ASR/ESP Control Lamp (K155)

‹› If the ASR/ESP control lamp (K155) -  1 - does not turn off after the ignition is switched on and the test  sequence is completed, the malfunction

may be:

There is a malfunction present which only affects the ASR/ESP. The  ABS/EDL and Electronic Brake pressure Distribution (EBD) safety systems are 
still completely functional, check Diagnostic Trouble Code (DTC) memory.

a

Short circuit to B+ in the ASR/ESP button. 

b

a short circuit to ground in ASR/ESP  control lamp (K155) activation.

c

The connection from instrument cluster to contact  31 of ABS control module (J104) is interrupted. 

d

ASR/ESP was switched off by the ASR/ESP  button (E256).

Initial Inspection and Diagnostic Overview|Page 17965 > < Initial Inspection and Diagnostic Overview