Touareg (7P5) V6-3.0L DSL Turbo (CATA) (2011)
/v6-3.0l_dsl_turbo_(cata)/Page-80004.png)
Threads, Cutting
CAUTION!
Wear protective eyewear when cutting the thread and when cleaning the threaded bushing with compressed air.
-
If the required thread depth is not reached because the bore is placed crooked, a guide bore with a maximum 16 mm diameter dimension - a - and
a maximum depth of 20 mm dimension - b - can be drilled.
-
Thread is cut using tap until dimension - a - = at least 63 mm.
