Touareg 2 V6-3.6L (BHK) (2008)
Garage Door Opener Transmitter: Service and Repair
Garage Door Opener Control Head
Roof Trim Lamps and Switches
Garage Door Opener Control Head
CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool
(plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.
The control head consists of the following components:
‹› Garage Door Opener Button 1 (E392)
‹› Garage Door Opener Button 2 (E393)
‹› Garage Door Opener Button 3 (E394)
‹› Garage Door Opener Indicator Lamp (K179)
‹› Push Button Illumination (L76)
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Carefully pry control head out of console in molded headliner - arrow -.
-
Disengage retaining tabs - arrows - and remove control head from frame.