Touareg 2 V6-3.6L (BHK) (2008)
Trunk / Liftgate Striker: Service and Repair
Striker Pin With Closing Assist
Rear Lid
Striker Pin with Closing Assist
‹› The same removal and installation instructions apply for striker pins without closing assist.
Removing
-
Remove the lock carrier cover.
-
Remove the bolts - 2 - and remove striker pin - 1 -.
Installation
-
Install striker pin - 1 -.
Further installation is in reverse order of removal.
-
Tightening specifications: Bolts - 2 - 25 Nm
-
Striker pin, adjusting, refer to --> [ Striker Pin, Adjusting ] See: Service and Repair/Rear Lid