Touareg 2 V6-3.6L (BHK) (2008)
/Page-1909004.png)
-
Remove lining mat - 1 - from glove compartment.
‹› Depending on version, the bolt - 3 - may also be a component part of the footwell cover. In this case, the bolt is already removed.
-
Remove the bolts - 2 -, - 3 -, - 4 - and - 5 -.
‹› When driver side trim is being installed, bolts must be installed in this order.
-
Separate driver side trim - 6 - from instrument panel and disconnect release from parking brake - 7 -.
-
Disconnect rotary light switch and headlight range regulator from respective wiring harnesses.
